It's unnecessary to say how important the bearing is. What should we do when we find that there is something wrong with the bearing of the bumper car? Here is an introduction.

Now there are a lot of amusement equipment have bearings, what should be paid attention to when dealing with children's amusement bumper car bearings?

1. If the damage of the bearing is not very obvious, the welding repair method can be used to deal with it, which can successfully solve the problem of bearing damage in children's entertainment facilities.

2. If the bearing damage is obvious, the damaged part of children's entertainment facilities should be removed first and then repaired.

3. If it is found that the bearing damage of amusement equipment is too serious, it will be unable to repair and should be replaced in time to avoid accidents.

In the operation of amusement equipment, it is important to ensure safety. Metal structure is the key point of amusement equipment. Only good metal structure can ensure the safe operation of amusement equipment. Introduce the requirements of metal structure for amusement equipment.

Specific requirements for metal structure of amusement equipment:

1. The requirements of metal structure coating of amusement equipment need to reach the anti rust standard. Only with good anti rust standard, can the phenomenon of amusement equipment corrosion be reduced;

2. For the stressed metal of amusement equipment, its corrosion depth should be lower than the thickness of prototype steel, so it is necessary to carry out better anti rust treatment;

3. Some amusement equipment is equipped with metal tracks, and the wear thickness of these rails also needs to be strictly controlled.

Therefore, when we operate amusement facilities, we should carry out good maintenance and maintenance of metal structures, so as to reduce the probability of damage to amusement facilities.

In the final analysis, amusement equipment is also a kind of mechanical equipment, which is composed of several parts. In the process of use, some parts will wear more or less. If the wear is serious, it will lead to the equipment can not run normally, and even cause accidents. Now let's talk about the corresponding solutions to the wear of amusement equipment. Let's have a look.

1. Lubrication. If the wearing parts of amusement equipment are lubricated, the friction between parts can be reduced, and the wear can be reduced;

2. If there is an error in the installation position of amusement equipment, there will also be wear phenomenon. Therefore, in order to reduce the wear, we need to improve the installation degree;

3. It is also very important to keep the amusement equipment clean, because some dust can easily cause wear and tear of children's play equipment.